Rockwell Automation 20D-P2-ENCO PowerFlex 700S Drive Phase II Control Second Encoder Option Card - Manual (Page 5)

Second Encoder Option Card for PowerFlex® 700S Drives with Phase II Control 5
Step 4: Removing the Inside
Cover from the Control
Cassette
Step 5: Removing the
Outside Covers from the
Control Cassette
Proper tightening torque for
reassembly is 7 to 10 lb.-in.
Task Description
Loosen screws on face of front cover and remove
the cover
A
=
A A
A
=
Proper tightening torque for
reassembly is 7-10 lb.-in. Task Description
Loosen screws on face of front cover and remove
the cover
Loosen screws on side of rear cover and remove
the cover
A
B
A
B