5accessories—mm (inches) – Rockwell Automation 42G PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors User Manual
Page 5
![background image](/manuals/577103/5/background.png)
5
Accessories—mm (inches)
Swivel/Tilt Mounting Assembly #60--2439
50.08
(2.0)
57.15
(2.25)
28.6
(1.13)
7.95
(0.31)
Swivel/Tilt Mounting Assembly #60--2681 for ClearSight 9000
10_ Adjustment in
each direction
28.6
(1.13)
7.95
(0.31)
50.08
(2.0)
87.0
(3.42)
Vertical Height Adjustment Brackets
101.6
(4.0)
22.2
(1.88)
139.7
(5.5)
H
#60--2721 = height 4 inches
#60--2722 = height 6 inches
#60--2723 = height 8 inches
#60--2724 = height 10 inches
152.4
(6.0)
7.0
(0.275)
Operational Notes
Ambient Temperature Ratings
80
45
50
55
60
65
70
75
110
260
60
210
160
Supply Voltage, V AC/DC
Am
bient
Tem
perat
u
re
,_
C
40
All models of the Series 9000 with the exception of those with the solid-state output (42Gxx--9xx3) and the EM-relay
output (42Gxx--9xx2) have a maximum operating temperature of +70_C (+158_F). The maximum operating temperature
of the 42Gxx--9xx3 and 42Gxx--9xx2 models can be determined from the graph shown above. That temperature is based
on the supply voltage fed to the sensor. For example, if the operating voltage is 120V AC the maximum operating
temperature would be +70_C (+158_F). An operating voltage of 220V AC would limit the ambient operating temperature
to +55_C (+131_F). Operation of the sensor at ambient temperatures which exceed these limits could result in sensor
failure.
Mounting and Wiring
Securely mount the sensor on a firm, stable surface or support. A mounting which is subject to excessive vibration or
shifting may cause intermittent operation. Rockwell Automation offers a wide variety of fixed and adjustable mounting
brackets as well as reflectors and quick disconnect cables. Refer to www.ab.com/sensors for further information on these
products. The sensor is supplied with the hardware kit #129--130 which contains a plastic mounting nut, lock washer, 2
M5 x 0.8 x 53 screws and nuts. Once securely mounted, the sensor may be wired as indicated in the wiring diagrams.
M5 x 0.8 x 53
Combination
Screws and Nuts
(Supplied)
Hardware Kit
(Supplied)