Step 4: install the new in-rush resistor, Related documentation – Rockwell Automation 20P PowerFlex DC Drive - Frame D In-Rush Limiting Resistor User Manual
Page 4
Publication 20P-IN065A-EN-P - May 2010
Copyright © 2010 Rockwell Automation. All rights reserved. Printed in USA.
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions
Step 4: Install the New
In-Rush Resistor
Install the new in-rush resistor in reverse order of removal as detailed in
Step 3:
Remove the Existing In-Rush Resistor
above.
Step 5: Close the Control
Panel and Document the
Change
1. Close the control panel in the reverse order of removal as detailed in
Open the Control Panel on page 2
2. Record the installation of the new resistor and date of installation on the
Field Installed Option label on the side of the drive (as shown below).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature
.
For . . .
Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…