Rockwell Automation 42JT-xxx VisiSight Photoelectric Background Suppression Sensors - Manual

Installation Instructions
42JT VisiSight™ Photoelectric Background Suppression Sensors
with IO-Link
Default Settings:
The factory default settings are as follows:
Sensing Range: Maximum Setting
Output Mode: Light operate (Output ON when target detected)
Output Type: Auto PNP/NPN or IO-Link. In Auto PNP/NPN mode,
the sensor continuously monitors the load connection and
automatically configures the output to PNP or NPN.
Sensor User Interface
LED Status
The table below provides LED status in the RUN mode, during
operation. The sensor is always in RUN mode, except when being
taught.
Auto PNP/NPN Operation
IO-Link Operation
 Connection Types
Green
OFF Power is OFF
ON Power is ON
Flashing (6 Hz) Unstable light level (0.5 < margin < 2)
Flashing (1.5 Hz) Output short circuit protection active
Yellow
OFF Output de-energized
ON Output energized
Green
OFF Power is OFF
Flashing (1 Hz) Power is ON
Yellow
OFF Output de-energized
ON Output energized
Cat. No. Suffix Description
-A2 2 m cable
-P4 Integral 4-pin pico (M8) QD
-F4 4-pin DC micro (M12) QD on 150 mm (6 in.) pigtail
-Y4 4-pin pico (M8) QD on 150 mm (6 in.) pigtail
Yellow LED
Push button
Green LED
General Specifications
 See Connection Types table
 ECOLAB on P4 and A2 models only
 UL: -20…+50°C (-4…122°F)
 For 42JT-B2LAT1 (180 mm) models
 For 42JT-B2LAT2 (400 mm) models
 UL: Class 2 source
Visible Red
42JT-B2LAT1-
42JT-B2LAT2- Class 1 Laser
42JT-B8LAT1-
Environmental
Certifications
cULus and CE Marked for all applicable
directives
Operating Environment IP67, IP69K, ECOLAB
Vibration
10… 55 Hz, 1 mm amplitude, meets or
exceeds IEC 60947-5-2
Shock
30 g with 1ms pulse duration, meets or
exceeds IEC 60947-5-2
Operating Temperature [C (F)] -20…+60° (-4…+140°) 
Storage Temperature [C (F)] -20…+80° (-4…+176°)
Optical
Light Source Red 660 nm Class 1 650 nm
Sensing Distance (90%
reflectivity white) [mm (in.)]
1…180 (0.04…7.09) 4…120
(0.16…4.72))
3…400 (0.12…15.8)
Sensing Distance Adjustability
[mm (in.)]
10…180 (0.4…7.09)
10…120
(0.4…4.72)
30…400 (1.2…15.8)
Sensing Distance (18%
reflectivity grey) [mm (in.)]
2…160 (0.08…6.3)
5…110 (0.2…4.33)
6…260 (0.24…10.24)
Sensing Distance (6% reflectivity
black) [mm (in.)]
4…120 (0.16…4.72)
8…100 (0.31…3.9)
12…200 (0.5…7.9) 
Adjustments Push button
Electrical
Voltage 10…30V DC 
Current Consumption 30 mA max.
Sensor Protection
Reverse polarity, short circuit overload
protection
Outputs
Response Time 0.5 ms max.
Output Type Auto PNP/NPN or IO-Link
Output Function Selectable light or dark operate
Output Current 100 mA max.
Output Leakage Current 10 μA max.
Mechanical
Housing Material ABS
Lens Material PMMA
Cover Material PMMA
Optional Accessories Mounting brackets, cordsets
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.