Rockwell Automation 20P PowerFlex DC Drive - Frame D, Series B Fan Circuit Board - Manual

Installation Instructions
PowerFlex DC Drive - Frame D, Series B Fan Circuit Board
Catalog Number SK-20P-S5D41
Identify Frame D, Series B
Drives Frame D, series B drives are identified as such on the data nameplate label located
on the right side of the drive (as shown in the example below).
ATTENTION: Only qualified personnel familiar with DC drives and associated
machinery should plan or implement the installation, start-up and subsequent
maintenance of the system. Failure to comply may result in personal injury and/
or equipment damage.
ATTENTION: To avoid an electric shock hazard, ensure that all power to the
drive has been removed before performing the following.
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions are required when installing, testing,
servicing or repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with static control
procedures, reference A-B publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other applicable ESD protection handbook.
EXAMPLE ONL
Y
A0NNN
500HP
3 Phase
Original Firmware V. 5.007
Serial Number: D23E0042
Series: B
Frame: D
6.2
8.2
I/O: 24VDC (Standard)
Ind. Cont.
Listed
C
R
US
max. 1 Phase
Hz 1.0/0.5A 1 Phase
Eq. 31KF
N223