Charging the battery – 3D Robotics IRIS Plus User Manual

Page 6

Charging the Battery

IRIS is powered by a rechargeable lithium polymer (LiPo) battery. Store

the battery at half charge then charge fully before flying. Batteries must

ship at half charge, so please charge before your first flight. Each full

battery provides up to 22 minutes of flight time without a gimbal and

up to 16 minutes when using a Tarot Gimbal.*

Connect charger to the

power adapter cable and

a wall outlet.

Connect the red cable to the

+ port and the black cable

to the - port.

Set the charger to

LiPo and 3A.

Connect the white

connector to the 3S port.

Join the two yellow

connectors together.

–

LiPo