Yamato Scientific DN410H Constant Temperature Ovens - Manual (Page 86)

36
Flowchart of Operational Procedures
Run “MENU”
A feasible program
number will appear on
the main display.
Program operation
ENTER key
When you run the oven in a
programmed operation,
proceeds as follows.
Select the program number
by using either the
Πkey or
the  key and then press the
ENTER key.
The operation start
time will appear on
the main display in
minute. The operation start
time will appear on the
main display in hour
as of now.
Set to your desired operation start
time by using either the
Πkey or
the  key.
Press the ENTER key
The oven can stop the fixed
temperature operation after a lapse
of the fixed time.
Set to your desired temperature by
using either the
Œ key or the  key
and then press the ENTER key.
The operation stop
time will appear on
the main display in
minute. The operation stop
time will appear on the
main display in hour
as of now.
Set the fan motion to
ON or OFF. Set the fan motion to
ON or OFF.
ENTER key.
Press the ENTER key
Set the fan motion after
the operation stopped.
ENTER key.
Press the ENTER key
Select the wait function
Set the wait function to ON when you want to hold the fixed
operation for a time that you have set in advance.
Set the wait function to OFF when you want to run the oven
through the operation for a time that you have set in advance.
ENTER key.
Press the ENTER key
The operation start
time will appear on
the main display in
minute. The operation start
time will appear on the
main display in hour
as of now.
When switching the sub display screens during standby
condition, the remaining time and the hour as of now can appear.
Once started operation, the remaining time (= HOLD), the hour
as of now and the set temperature can be switched on the sub
display.
Set to your desired temperature by using either the
Œ key or the  key and then press
the ENTER key.
Set to your desired operation start time by using
either the
Œ key or the  key.
The oven can start the fixed temperature
operation after a lapse of the fixed time.
Auto stop Auto start
ENTER key.
Press the ENTER key
Set to your desired
temperature by using either
the
Œ key or the  key.
Menu key
Fixed temperature
operation
Displays set
temperatue
Displays set
temperatue
Displays set
temperatue