Yamato Scientific DN410H Constant Temperature Ovens - Manual (Page 66)

16
Auto Stop Operation Method
Selection of operation menu
•
Press the MENU key and
select the auto stop operation.
Press the MENU key.
The menu lamp of an AUTO STOP
blinks.
•
will appear on the
sub display and the desired
temperature can be input.
Sub display
Inputting the set temperature
•
Push either the ▲ key or
the ▼ key to blink the
desired temperature on the
main display and push the
ENTER key.
Press either the ▲ key or the ▼
key several times.
Then, the desired set temperature will
appear on the main display.
Push the ENTER key.
The main display will light up to
indicate the set temperature you have
chosen.
After about 1 secon d
•
will appear on the
sub display and the operation
stop time can be input.
Inputting the desired set
time
•
Push either the ▲ key or
the ▼ key to blink your
desired time (or hours) for
operation stop on the main
display, and press the
ENTER key.
Press either the ▲ key or the ▼
key several times.
Then, the desired stop time (or hour)
will appear on the main display.
Push the ENTER key.
• will appear on the
sub display and you can
chose the wait function to be
activated or not.