Yamato Scientific DN410H Constant Temperature Ovens - Manual (Page 65)

15
AUTO START OPERATION INSTRUCTIONS
Selection of operation menu
•
Select AUTO START mode by
pushing the MENU key.
Push the MENU key.
The operation menu lamp of an AUTO
START blinks.
•
will appear on the
sub display and the desired
temperature can be input.
Sub display
Inputting the set temperature
•
Press either the ▲ key or
the ▼ key to display the
desired temperature on the
main display and push the
ENTER key.
Press either the ▲ key or the ▼ key
several times.
Then, the desired set temperature will
appear on the main display.
Press The ENTER key.
•
will appear on the
sub display and the operation
start time can be input.
Inputting the desired set
time
•
Press either the ▲ key or
the ▼ key to blink start time
(or the hour) on the main
display, and press the
ENTER key.
Press either the ▲ key or the ▼
key several times.
Then, the desired start time (or hour)
will appear on the main display.
Press the ENTER key.
• The STANDBY lamp of the
operation monitor blinks.
• The operation will be in standby
condition.
• After reaching the set time
(or hour), the oven will start
to run the auto start
operation to the renewed
temperature.