Yamato Scientific DN410H Constant Temperature Ovens - Manual (Page 25)

19
SWITCHING FROM ONE OPERATION TO ANOTHER
This instrument can switch to a different operation mode without stopping the current program no
matter what mode it is in, fixed temperature operation, auto-start/stop operation, and program
operation.
Selection of operation menu
• Press the MENU key several times until the
desired operation menu lamp flashes on the
Operation Menu.
• Since the current operation has not stopped, the
operation menu lamp is also lit.
• On the Operation monitor -- the temperature
pattern indicator lamp blinks with the current
segment being executed.
Press MENU key several times.
• This status allows you to enter each parameter
into blinking or lighting operation menu.
When the fixed temperature operation is selected
ƒ The main display shows the current internal
temperature.
ƒ The sub-display flashes the temperature set by the
previous fixed temperature operation.
When auto-start operation is selected
ƒ The main display flashes the temperature set by the
previous auto-start operation.
ƒ The sub-display shows (Temp.)
When auto-stop operation is selected
ƒ The main display flashes the temperature set by the
previous auto-stop operation.
ƒ The sub-display shows (Temp.)
When program operation is selected
ƒ The main display flashes the previously set program
number.
ƒ The sub-display shows (Program) The lamp blinks or lights.
• Now operate according to the operation method you have chosen, see that section of this instruction
manual.