Yamato Scientific DG400 Drying Ovens for Laboratory Tools - Manual (Page 14)

12
4. Operating procedures
List of operation modes and functions
Operation modes of the unit are as shown below:
№ Name Description Page
1
Fixed temperature
operation
Turning the ELB on to enter the operation setting mode.
Proceed to temperature setting that uses ▼▲ keys.
Pressing the RUN/STOP key long starts the operation and
pressing it long again stops operation.
P.16
2
Quick auto
stop operation
Used when you want to “stop fixed temperature operation
being performed automatically in several hours.
Press the TIMER key during fixed value operation to display
“AStP.”
Set a duration before stop with the ▼▲ keys.
Pressing the RUN/STOP key starts quick auto stop operation
and activates the timer in the middle of it to automatically
stop it after the set period of time.
P.17
3 Auto stop operation
Used when you want to “set automatic stop for fixed value
operation when making settings for it.”
Press the TIMER key to display “AStP.”
Set a duration before stop with the ▼▲ keys.
Pressing the RUN/STOP key starts auto stop operation.
P.19
4 Auto start operation
Used when you want to “start operation automatically after
several hours” after power is turned on.
Press the TIMER key to display “AStr.”
Set a duration before stop with the ▼▲ keys.
Pressing the RUN/STOP key starts auto start operation.
P.21
* Operation mode cannot be changed while the unit is in operation. First stop operation before
changing the mode.