Yamato Scientific CLH600 Cool Line - Manual (Page 23)

20
Operation Method
Quick Auto Stop Operation
To correct or check setting…
Changing the setting temperature during operation is possible by pressing the FIXED TEMP key. Press
the ENTER key after changing the setting.
Changing the setting time during operation is possible by pressing the TIMER key. (Note that the time
setting is required using the value calculated by adding a new additional time to the already passed time in
this case.) Press the RUN/STOP key after changing the setting.
Press the ▼ key to display the setting temperature, operation mode and residual time on the setting
temperature screen.