Yamato Scientific CLH600 Cool Line - Manual (Page 16)

13
Operation Method
Operation Mode and Function List
The operation modes of this unit are as follows;
Name Description Page
Fixed Temperature
Operation
Pressing the FIXED TEMP key enters into the fixed temperature
operation setting mode.
Pressing it again enters into the temperature setting mode. The "
▲▼
" are used to set temperature.
Pressing the RUN/STOP key starts or stops operation.
17
Quick Auto Stop
Operation
This operation is used to specify the period up to automatic stop
during operation.
The period up to operation stop can be set by pressing the TIMER
key during fixed temperature operation.
The "▲▼" are used to set the time.
Pressing the START key starts the quick auto stop operation,
activates the timer function and stops the operation automatically
after specified period.
19
Auto Stop Operation
This operation is used to specify the automatic stop time in the fixed
temperature operation.
Pressing the TIMER key displays "AStP".
The setting temperature "Sv" can be set by pressing the ENTER
key.
The operation time "tim" can be set by pressing it again.
Pressing the RUN/STOP key starts the auto stop operation.
21
Auto Start Operation
This operation is used to specify the period up to automatic start
after power on.
Pressing the TIMER key displays "ASｔr".
The setting temperature "Sv" can be set by pressing the ENTER
key.
The operation time "tim" can be set by pressing it again.
Pressing the RUN/STOP key starts the auto start operation.
23
NOTE) This unit is impossible to be changed the mode during the operation. If the mode requires to be
changed, stop the operation.