Yamato Scientific CLH600 Cool Line - Manual (Page 21)

18
Operation Method
Fixed Temperature Operation
4. Start operation
• Press the orange RUN/STOP key for about one second. The
unit starts operation and the blinking FIXED TEMP lamp lights
on.
5. Stop operation
• Press the orange RUN/STOP key for about one second. The
unit stops operation and the FIXED TEMP lamp lights off. The
screen returns to the initial setting screen.
To correct or check setting…
Press the FIXED TEMP key again to correct or check the setting.
Changing the setting temperature during operation is also possible by pressing the FIXED TEMP key.
Press the ENTER key after changing the setting.