Western Digital My Passport Studio User Manual - Manual (Page 43)

MY PASSPORT STUDIO
USER MANUAL
MANAGING AND CUSTOMIZING YOUR DRIVE – 38
Your Computer Exits Sleep Mode
If your computer goes into sleep mode, an unlock screen might not display when you
reactivate the computer. To unlock the drive, you can use the virtual CD as described in
“The WD SmartWare Software is Not Available” on page 37, or you can use the
WD SmartWare icon.
To unlock the drive using the WD SmartWare icon:
1. Click the WD SmartWare icon .
2. Select the drive and then Unlock Drive:
3. The WD SmartWare Drive Unlock screen displays:
4. Type your password in the Password box.
If you created a password hint when you created your password, click the Password
hint pointer to see the hint.
5. Click Unlock.
Note: If you click Exit, you will not be able to access the files on your drive.