Western Digital WD SmartWare User Manual User Manual
Page 54
WD SMARTWARE SOFTWARE
USER MANUAL
RETRIEVING FILES
– 50
d. If you selected the computer option, use the backup source device selector to
specify the internal drive, drive partition, or external drive that you want to copy
retrieved files to:
2.
In the Backup Target area of the Home screen:
a. If you have more than one backup target device connected to your computer,
select the one that you want to retrieve files from.
b. Verify that a light-blue highlight surrounds the selected device:
c. If the selected device has more than one drive partition or network share, use the
backup target device selector under the device icon to specify the one that you
want to use:
3.
Click the Retrieve tab to display either the:
Select a destination for retrieved files dialog
Select a volume to retrieve from dialog
(See Figure 3 on page 15.)
IF you have . . .
THEN the WD SmartWare software displays the . . .
Created a single backup
on the selected
retrieve
source device
from the
selected retrieve
destination device,
Select a destination for retrieved files dialog:
(Continued)
Selected My Book Drive