beautypg.com

Vigo VG06051 User Manual

Page 5

background image

BEFORE INSTALLATION:

If needed, remove the plastic layer of the base border. Do not

remove the plastic layer off the plastic platform of the base. Wall and base joints must be

siliconed properly.

INSTALLATION INSTRUCTION

See suggestion of configuration below.

RIGHT INSTALLATION

LEFT INSTALLATION

door

door

DOOR PANEL

FIG. 1A (GLASS CONFIGURATION DIAGRAM)

DOOR PANEL

BIG FRONT
FIXED PANEL

SMALL FRONT
FIXED PANEL

IMPORTANT: THE VG06051 CLEAR GLASS MODEL HAS A REVERSIBLE DOOR AND CAN BE INSTALLED TO THE
RIGHT OR LEFT SIDE. THE MATTE GLASS MODEL IS NOT REVERSIBLE AND THE DIRECTION OF INSTALLATION IS
SPECIFIC TO THE MODEL NUMBER. (SEE CONFIGURATION DIAGRAM BELOW)

5

BIG FRONT
FIXED PANEL

SMALL FRONT

FIXED PANEL

SIDE GLASS
PANEL

SIDE GLASS
PANEL

MODEL VG06051

WARNING

WE STRONGLY RECOMMEND THAT A LICENSED PROFESSIONAL INSTALL THIS SHOWER

CABIN AND INCLUDE THE ASSISTANCE OF A SECOND PERSON TO INSTALL THE DOOR UNIT.

INSTALLATION OF THE SHOWER DOORS BY AN INEXPERIENCED PERSON MAY RESULT IN

GLASS BREAKAGE AND, CONSEQUENTLY, CAUSE PERSONAL INJURY OR DEATH.
BEFORE STARTING
Compare items on your invoice with what you have received. Carefully review the Packing List on
page 2. If any items are missing contact Vigo Industries at 1-866-591-7792.

REQUIRED TOOLS

Square and/or Phillips #1 and #2 screwdriver

Flat head screwdriver
Electric drill plus 1/8", 3/16", or 3/32" drill bit (depending on wall)
Level
Measuring tape
Pencil (non-permanent)

Clear silicone caulking

Utility knife

WARNING

!

Handle fragile items with care to prevent injury or material damage.
Glass on panels and doors is tempered glass and must never be cut to prevent personal injury.

IMPORTANT

Fiberglass or acrylic construction might not be sufficiently strong enough to support the shower

door enclosure. You should use the wood framing from behind the face edge of the stall to

provide a secure mounting to the door. Apply a bead of silicone between the walls and base of

the stall.

For optimum performance, you should install the shower door perfectly level on a level surface.