UVP Spot-Lite System - Manual (Page 4)

Spot-Lite User’s Guide
Introduction
About this Guide
This guide provides complete instructions to set up and run UVP’s Spot-Lite system.
The manual fully describes the components of the system, the methods for setting up the system
including interconnections and adjustments, and a full description of how it can be used.
If you have any problems installing or operating the equipment, please do not hesitate to call UVP at
(800) 452-6788, (909) 946-3197 in the US or +44(0)1223-420022 in the UK.
Spot-Lite
Spot-Lite is a portable ultra-violet curing system incorporating up to six flexible light guides (or wands)
that may be used – either mounted or hand held – to direct UV to a precise point on the work area.
Spot-Lite is completely safe to operate.
Spot-Lite is entirely modular in design. The base unit is available in 2-wand and 6-wand versions and
is supplied fitted with a choice of light source. The light assembly unit is designed to accept a range of
interchangeable UV lamps. A single unit can therefore provide different wavelength outputs for specific
applications – including the curing of UV adhesives, inks, paints and coatings, potting compounds and
resins.
An integral filter removes unwanted wavelengths, including the infrared portion of the spectrum, to
avoid overheating the work area.
4