UVP GelMax Imager - Manual (Page 6)

GelMax Imager 6
Fluorescent Focus Target
Thermal Printer
Refer to “Replacement Parts and Accessories” in this manual for UV-blocking spectacles, goggles and
faceshield ordering information.
Interchangeable Sample Plates
In addition to the 302nm UV transillumination provided by the built-in transilluminator, four
Interchangeable Sample Plates are available to provide additional transillumination options. Once in
place, these Plates can provide 460/470nm Visi-Blue blue, white, or 365nm longwave UV
transillumination. Included as standard is a solid, non-translucent black plate for placement of samples
which don’t require transillumination.
A Sample Plate Holder is available to store the Interchangeable Sample Plates neatly next to the
GelMax Imager. See “Replacement Parts and Accessories” for ordering information.
Ethidium Bromide (EtBr) Emission Filter
The ethidium bromide (50mm square) UV-blocking bandpass interference filter blocks UV and IR
radiation emitted from the transilluminator. The filter is placed in the slide-out filter wheel on the side of
the Imager. The filter allows visualization of fluorophores from 580-630nm, targeting the ethidium
bromide emission peak of 605nm.
Additional and custom filters are available for other specific fluorophores. See “Replacement Parts and
Accessories” or contact UVP for ordering information.
Fluorescent Focus Target
The UVP Fluorescent Focus Target fluoresces when placed
on the UV transilluminator. The Target provides sharp
fluorescent images to aid in adjusting the lens and camera
settings for ideal imaging results.
Optional Equipment
UVP offers a variety of optional equipment to support the needs of varying laboratory environments. Refer to
“Replacement Parts and Accessories” at the end of this manual for optional equipment part numbers.
Thermal Printer
The thermal printer provides archive quality, 256 grayscale
prints and five optional cost-effective print sizes.