beautypg.com

Unisteer 8011900-01 Chevrolet C10 Power Rack & Pinion Kit 1960-72 User Manual

Page 6

background image

Page 6

656410

5. Drive larger of two roll pins thru u-joint and shaft, then drive smaller roll pin

inside of the larger pin already in u-joint.

1967-1972 shaft kit only

1. Take off old linkage up to the end of the steering column.

2. Slide u-joint onto pinion shaft and insert pinch bolt. Leave all hardware loose

until everything is installed.

3. Slide upper u-joint on column so that the yokes are lined up in the same way and

insert pinch bolt.