Thrush DSVE Series - Manual (Page 4)

Thrush Co.
Manual #9636-0550
Section 1
General Product Information
1.1 Overview
The Thrush Hot-Pak
® has been carefully assembled and factory tested to provide years
of trouble-free service. This manual provides information to allow the installer/operator to
install, operate, service and maintain the Hot-Pak. In this manual the installer/operator
will find that multiple Hot-Pak models are covered. Visually these different models will
look very similar. The main difference between models is the height and diameter of the
unit. The model number designates the size of the unit (Figure 1-1 Overview). Although a
standard configuration is shown throughout this manual, optional equipment is available.
Figure 1-1 Overview
Model Designation
DSVE-642
No. of Tube Passes
Bundle Length (FT)
Bundle Diameter (IN)
Vertical Design
Steam to Water
Double Wall Construction (Optional)
Enhanced Surface Area (Optional)
Steam
Inlet
Water
Inlet
Water
Outlet
Safety
Relief
Valve
Condensate
Drain
Jacket
Insulation
Tube Bundle
Shell
Open Area of
Top Baffle
Top Baffle
Sensor Connection