Talos Security CT330S CCTV Tester - Manual (Page 3)

CCTV Tester User’s Manual
3
1，Safety Information
1.1 Precaution before using the tester
A. Make sure to read the user’s manual before using the product.
B.
Make sure to check the input and output range of voltage or current at every input and
output ports before connecting to prevent system overloading.
C.
The following operational environment should be maintained constantly:
• Temperature: -22°F–+158°F (-30°C–+70°C)
• Relative humidity: 30% ~ 90%
• Recharging voltage: DC5V
1.2 Precautions when using the tester
A.
Do not use the tester in damp humidity or leaking gas environments.
B. Do not touch the tester with wet hands.
C.
Be mindful not to shock or shake the tester while in use to avoid damage.
D. Avoid the places of strong magnetism or electric wave, which could cause
incorrect measuring.
E. Be careful not to expose the ports or joints to dirt or liquid.
F.
Do not disassemble the tester.
1.3 Precautions for battery charging and usage
A. Use only original chargeable battery; when charging the batteries, please use the
original power adapter.
B. Make sure not to disorient the polarization of batteries.
C.
Do not short circuit or disassemble batteries.
2，Introduction
2.1 Features and function
A. Video test
The video signal and the quality of picture can be tested.
B. PTZ controlling
It has the basic operational test of PTZ products, function include pan/tilt, zoom
in/out, preset setting and operation, speed adjustment etc; support multiprotocol
and baud rate, communication via RS232, RS422 simplex and RS485 port.
RS485 protocol include: Pelco D,P, Samsung, Panasonic, Molynx. Additional
Protocols may be added as per customer requests.