Talos Security CT330S CCTV Tester - Manual (Page 12)

CCTV Tester User’s Manual
12
3.9 Video generating
A.
Connect the tester to the displayer device as the picture shows:
B. In the main menu, press the num-button”4” to switch to the video generating function
submenu, as the follows:
C. Operation setup
• Press num-button
“4”
to switch to the video generating function mode.
• Press
SET to switch the video generating signal: Color bar, Blue, Red, Pink,
Green, Cyan, Yellow and White.
• Press
TELE
to send the generated video signal to the display device.
• Press
WIDE to recall the generated video signal.
• Press
MENU
button in short time to hid/display the video generating menu
character.
• Press
MENU button for 1 second to back to the main menu.
3.10 RS485 data test
A
.
Connect the tester to the controlling device as the picture shows: