Talos Security DR800 Series DVR User Manual - Manual (Page 8)

H.264 Network DVR
- 8 -
Alarm
4/8ch alarm input (alarm can be triggered by
normally open or normally closed switch),
Video loss alarm, Motion detection alarm.
Trigger device can be a smoke detector,
temperature detector, infrared detector, etc.
Relay switch alarm output to link an alarm
system or live lighting control.
Alarm input and output interfaces include a
protection circuit to keep the main equipment
from being damaged.
Communication
Interfaces
Interface for alarm input and PTZ control.
Standard Ethernet interface for remote access via network.
PTZ Control
Support PTZ through via RS485 protocol.
Scalable multiple decoder protocols for PTZ
and speed dome control functions.
Smart Operations
Intuitive GUI interface; USB mouse operation.
CHAPTER.2. Familiarization
2.1 Unpacking and Inspection
Upon receipt of your DVR check for any physical damage to the unit or package. Verify the contents of the package include the DVR, Manual, USB
mouse, IR remote control, power supply and cable, screws to attach the hard drive and client software disc.
1 .
Front and Rear Panels
Verify that switches on the front panel are all in tact and functional. Verify that all connectors on the rear panel are in tact and not loose.
2. Open the cabinet and look-over
In addition to checking whether there are obvious signs of external damage, check that the panel data cable, power cable, power supply and
motherboard fan connection has not become loose.