Stack-On GORTA-1600 - Manual (Page 3)

3
LEFT DOOR
RIGHT DOOR
FIXED
HINGE PIN
PLASTIC
HINGE
BUSHING
SHELF
(2)
Shelf Assembly
KEEP ALL 4 SHELF CLIPS AT THE SAME LEVEL
Shelf Assembly
Secure Shelf Clip Position Shelf Clip
3.
Install the doors. First insert the hinge pin
located at the top of the door into the
plastic hinge bushing hole in the top of the
cabinet. Position the bottom of the door
over the bottom plastic hinge bushing hole
and insert the removable hinge pin.
Assemble the handles to the doors.
Place the cabinet in the desired location.
Level the cabinet adjusting the levelers
through the bottom panel access holes
until the cabinet is square and the doors
work properly.
Install the shelves using 4 shelf clips each.
(See illustration)
Snap the nameplate until flush on the left
door.
Maximum Weight Limits
Shelves: 40 lbs. (18 KG) each
Cabinet: 200 lbs. (91 KG) total
40148-0910
3 9