Stack-On GORTA-1600 - Manual (Page 2)

1
TOP
BOTTOM
SIDE
SIDE
These holes must be
towards the back on
both side panels.
2
BACK (2)
1.
With the side panel holes towards the
back (as noted in the illustration)
assemble the top and bottom to the
side panels with 4 screws each. Do
not over tighten the screws.
Screw the 4 levelers all the way into
the bottom panel.
Holding the top, carefully lift the
cabinet to the upright position.
Continue to step 2 to assemble the
back panels.
2.
Starting at the bottom, screw the 2 back panels
to the cabinet back using 6 screws each. Do
not over tighten the screws.
40148-0910
2 9