RKI Instruments 71-0191RK - Manual (Page 13)

Control Buttons • 10
Control Buttons
There are 5 control buttons on the main screen: Get Current EAGLE
2 Data, Select Distributed File, Transmit New Data, Power OFF,
and Exit. These buttons are used for communication between the
Eagle 2 and the Eagle 2 Maintenance Data Loader Program.
Get Current EAGLE 2 Data
Use Get Current EAGLE 2 Data to load a connected instrument’s
user and station IDs, catalytic combustible user defined gases, and PID
user defined gas parameter configuration into the Maintenance Data
Loader Program so they can be updated if desired. Follow these steps
to retrieve a connected instrument’s parameter configuration and
update parameters that are available in the Eagle 2 Status area:
1. Launch the Eagle 2 Maintenance Data Loader Program as
described in “Launching the Program” on page 7.
2. Connect the Eagle 2 to the Maintenance Data Loader Program as
described in “Connecting an Eagle 2 to the Maintenance Data
Loader Program” on page 8.