RKI Instruments 71-0191RK - Manual (Page 12)

9 • Connecting an Eagle 2 to the Maintenance Data Loader Program
3. Press and hold the POWER
ENTER RESET button on
the Eagle 2 until you hear a
beep, then release it. The
Eagle 2 will begin it’s power
up sequence. If a successful
connection between the
Eagle 2 and the computer
occurs, the Get Current
EAGLE 2 Data control
button becomes active.
You can now retrieve the connected instrument’s configuration
information using the Get Current EAGLE 2 Data command button.
You must retrieve the connected instrument’s configuration
information before you can perform operations such as saving the
instrument’s user and station IDs, catalytic combustible user defined
relative response gas list, or PID user defined relative response gas list
parameter configuration to a file and changing the instrument’s
parameter configuration.
Figure 5: Aligning the Eagle 2 with the Cable Infrared Port
Figure 6: Connection Mes-
sage