Installation method – RKI Instruments SD-705EC User Manual

Page 10

PT2E-1140

２−５ Installation Method

(

1) Install the detector body to a firm surface (wall surface, etc.) with M6 bolts.

Use an optional mounting piece when installing the detector to the 2B pipe.
(For the installation method, refer to Fig.1 through 4 below)

During installation, take care not to drop or throw the detector.
Otherwise, the strong impact may cause damage to the equipment

CAUTION

！

(a) Installation without using drip-proof cover

・ Installation to the wall (Fig.1)

Install to the wall after fixing the detector to the detector mounting piece with screw as
shown above.

・Installation to the 2B pipe(Fig.2)

Secure the detector to the detector mounting piece with screw and fix it to the U-bolt(M10) for
2B pipe as shown above.