Status lights specifications, Warnings – Paxton 12V DC PoE+ power supply in cabinet with Net2 plus User Manual
Page 3

Page 3
13.35V DC
1.5 A
20.4 W
0.8 A
10.36 W
36V DC
57V DC
0.83 A
0 °C
+49 °C
232 mm
320 mm
80 mm
236 mm
320 mm
80 mm
:
The following warnings and instructions MUST be adhered to. Read the instructions before installing and powering the
equipment. Keep the instructions in a safe place for future reference.
:
RECEIVING INSPECTION- Remove any traces of packing material from the unit as such debris may create a fire or shock hazard.
Unpack the unit with care and inspect for transit damage. If damage is suspected, the unit must not be used or tested, but should be
returned to Paxton for investigation and the damage reported to the carrier.
:
INSTALLATION- Only qualified and trained personnel, familiar with this type of product and who fully understand these instructions
should install, connect or test this equipment. There are no user serviceable parts within the PSU unit.
:
- The equipment is intended for indoor use only in dry locations.
:
- This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Load output current (802.3af - 802.3at type 1)
12V Output voltage
Load output power (802.3af - 802.3at type 1)
Input supply voltage
Input supply current
Status Lights
Specifications
Operating temperatures - all items
PSU Electrical
Power
PoE+
This LED is on when the unit is operating in the high power mode
This LED is on when the input supply is healthy.
Environment
Metal Cabinet
Plastic Cabinet
Dimensions
WARNINGS
Min
Max
Width
Height
Depth
Waterproof
No
Min
Max
Load output power (PoE+ High power)
Load output current (PoE+ High power)
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596