Paxton 12V DC PoE+ power supply in cabinet with Net2 plus - Manual (Page 2)

Page 2
1. Screws and wall plugs are provided in a fitting
kit. With reference to the diagrams, determine
where the top, central mounting position is required
and drill a hole suitable for a No 8 wall plug.
2. Tap in one of the wall plugs.
3. Put in one of the long screws, leaving a suitable
gap to the wall surface and slide the cabinet over it.
4. Mark the hole positions for the lower 2 screws.
5. Remove the cabinet and drill the additional holes.
6. Tap in the 2 wall plugs and hang the cabinet back
onto the top screw.
7. Secure the cabinet with the 2 lower screws.
8. Tighten the top screw.
Fitting
232 mm
68 mm
116 mm
25 mm
320 mm
268 mm
68 mm
Metal Cabinet
136 mm
236 mm
Plastic Cabinet
196 mm
118 mm
18 mm
320 mm
284 mm
98 mm 98 mm