Oyen Digital DATATALE RS-M2QJ 2-BAY RAID User Manual
Page 29
29
4. A popup window stating, “Copy Data From Disk 1 to Disk 2. All data in
Disk 2 will be lost. Continue?” Click on the “Yes” icon to confirm.
5. During the rebuild, a “Rebuild Percentage” status window will appear and
the information under “RAID Status” and “Disk Information” sections
should reflect the same.
If data is accessed while the chipset is processing the Rebuild task, the
speed of data access may vary or decrease. Hence, data access of the hard
disk(s) during Rebuild is highly not recommended.
Even if the RAID System loses connection to the host, the Rebuild will
continue. If the RAID System is powered off, the RAID System will retain the
Rebuild status in its memory. When the RAID System is powered “on” again, the
Rebuild process will resume from the previous status.