Brother 4800 - Manual (Page 7)

v
Quick Reference Guide
Sending Faxes
Automatic Transmission
1
Place the original face down in the ADF.
2
Enter the fax number using One Touch (For
FAX-2850 Only), Speed Dial, Search or the
dial pad.
3
Press Fax Start .
4
Sending a Cover Page
5
Place the original face down in the ADF.
6
Press Menu/Set, 2, 2, 7 .
7
When NEXT FAX ONLY appears, press
Menu/Set .
8
Press to select ON (or OFF ), and then
press Menu/Set .
9
Press to select a comment, and then
press Menu/Set .
10
Enter two digits to indicate the number of
pages being sent, and then press
Menu/Set .
11
Press 1 to select additional settings
— OR —Press 2 if you are ready to fax.
12
Enter the fax number.
13
Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 5 .
3
Press to select ON , and then press
Menu/Set
— OR —
For the next transmission only, press
to select NEXT FAX ONLY , and then
press Menu/Set .
4
For the next fax only, press to select
ON , and then press Menu/Set .
5
Press 1 to select additional settings
— OR —Press 2 if you are ready to fax.
6
Enter the fax number.
7
Press Fax Start .
Receiving Faxes
Select Receive Mode
Press Receive Mode to select FAX ONLY ,
FAX/TEL , TAD:ANSWER MACH . or
MANUAL . If you select
FAX/TEL , make sure to set Ring Delay and F/T
Ring Time.
Manual Reception
1
Pick up the handset.
2
Press Fax Start if you hear fax tones
(beeps).
3
When the LCD shows RECEIVING ,
replace the handset.
For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed
in the carton box.
or
or
or
or
or