16 setting up and using pc fax (for windows® only), Introduction, Brother resource manager – Brother 4800 User Manual

Page 106: Mfc remote setup, Chapter 16, Setting up and using pc fax (for windows, Only), Introduction mfc remote setup, Setting up and using pc fax, For windows

Chapter 16

Setting Up and Using PC FAX

(For Windows

Only)

Introduction

This chapter outlines the basics of the Brother software, so you can get started using the Multi-
Function Link

Pro Suite software. Detailed installation and setup instructions are in the On-Line

Documentation section of the Brother CD-ROM that is included with the machine.

Multi-Function Link

Pro Suite software for the machine includes ScanSoft

™

PaperPort

for

Brother and ScanSoft

™

TextBridge

. (See Using ScanSoft™ PaperPort® for Brother and

ScanSoft™ TextBridge®, page 89.)

Brother Resource Manager

The Brother Resource Manager application must be running for you to use the machine with your
Windows

computer. Multi-Function Link

Pro Suite software and the MFL Pro Suite Printer

Driver automatically load the Resource Manager, as needed. The Resource Manager allows the
single bi-directional Parallel port on the machine to simulate a Communications port for faxing and
scanning and to simulate a Parallel port for Windows

GDI printing.

MFC Remote Setup

The MFC Remote Setup application allows you to quickly set up the machine by taking advantage
of the ease and speed of programming on your PC. When you access this application, the settings on
the machine will be downloaded automatically to your PC and displayed on your computer screen.
If you change the settings, you can upload them directly to the machine.

This starts the process of uploading the data to the machine and exiting the remote setup program.
If an error message is displayed enter the correct data again, then click OK.

Cancel

This exits the remote setup application without uploading the data to the machine.

This manual is related to the following products:

2850