Northern Connectors Radiall RF & Microwave Cable Assemblies - Manual (Page 21)

www.radiall.com
B-22
CONSTRUCTION / DImENSIONS
material mm inches
center conductor solid BC (1) 0.81 0.032
dielectric FHD PE (2) 3.68 0.145
inner shield Al (3) tape 3.81 0.150
outer shield TC (4) braid 4.37 0.172
jacket blue PVC (5) 5.92 0.233
ElECTRICal ChaRaCTERISTICS
characteristic impedance 75Ω ± 1.5Ω
operating frequency range DC - 4.5 GHz
shielding effectiveness -
voltage withstanding 300 V rms
peak power -
capacitance 53.5 pF / m 16.3 pF / ft
velocity of propagation 83 % (4.0 ns / m)
mEChaNICal ChaRaCTERISTICS
recommended minimum
bending radius
63.5 mm 2.5 inch
weight 46 g / m 0.031 lbs / ft
ENVIRONmENTal ChaRaCTERISTICS
operating temperature range -30 / +75 °C -22 / +167 °F
fire resistance yes (UL1666 Vertical Shaft)
halogen free no
fREqUENCy / aTTENUaTION (typ.) /
CW maX pOWER (sea level / 25 °C)
GHz dB / m dB / ft Watts
0.5 0.173 0.052 -
1.0 0.247 0.075 -
1.5 0.304 0.092 -
2.0 0.353 0.107 -
2.5 0.397 0.120 -
3.0 0.437 0.132 -
3.5 0.473 0.143 -
4.0 0.508 0.154 -
4.5 0.541 0.164 -
attenuation calculation (dB/m) (0.24 x √f GHz) + (0.007 x f GHz)
(1) BC = Bare Copper
(2) FHD PE = Foam High Density PolyEthylene
(3) Al = Aluminum
(4) TC = Tinned Copper
(5) PVC = PolyVinyl Chloride
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to HDTV/Video
application.
APPLICATION NOTE
CONSTRUCTION / DImENSIONS
material mm inches
center conductor solid BC (1) 1.02 0.040
dielectric FHD PE (2) 4.56 0.180
inner shield Al (3) tape 4.70 0.185
outer shield TC (4) braid 5.26 0.207
jacket blue PVC (5) 6.95 0.274
ElECTRICal ChaRaCTERISTICS
characteristic impedance 75Ω ± 1.5Ω
operating frequency range DC - 4.5 GHz
shielding effectiveness -
voltage withstanding 300 V rms
peak power -
capacitance 53.15 pF / m 16.2 pF / ft
velocity of propagation 82 % (4.1 ns / m)
mEChaNICal ChaRaCTERISTICS
recommended minimum
bending radius
69.85 mm 2.75 inch
weight 59.5 g / m 0.04 lbs / ft
ENVIRONmENTal ChaRaCTERISTICS
operating temperature range -30 / +75 °C -22 / +167 °F
fire resistance yes (UL1666 Vertical Shaft)
halogen free no
fREqUENCy / aTTENUaTION (typ.) /
CW maX pOWER (sea level / 25 °C)
GHz dB / m dB / ft Watts
0.5 0.134 0.040 -
1.0 0.193 0.058 -
1.5 0.240 0.073 -
2.0 0.281 0.085 -
2.5 0.318 0.096 -
3.0 0.352 0.107 -
3.5 0.384 0.116 -
4.0 0.414 0.125 -
4.5 0.443 0.134 -
attenuation calculation (dB/m) (0.179 x √f GHz) + (0.014 x f GHz)
(1) BC = Bare Copper
(2) FHD PE = Foam High Density PolyEthylene
(3) Al = Aluminum
(4) TC = Tinned Copper
(5) PVC = PolyVinyl Chloride
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to HDTV/Video
application.
APPLICATION NOTE
Cable assemblies
flEXIblE CablE 6/75 D
(HD 0.8/3.7 - RG59 type)
flEXIblE CablE 7/75 D
(HD 1.0/4.8 - RG6 type)
p/N: C291 360 093 p/N: C291 384 083
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)