Multiquip 8FP Series - Manual (Page 47)

SPECIFICATIONS
8FP FLOOR PLANER SERIES OPERATION AND PARTS MANUAL REV #1 (10/27/06) PAGE 47
Specifications
FRAME
STRUCTURE................................................................................. Unitized, Welded Steel Plate
DRIVE REDUCTION SYSTEM ..................................................... 3VX335 Belt/Pulley
DRIVESHAFT SIZE AND CONFIGURATION............................... 13/16-inch (21 mm) hexagon
MAXIMUM CUTTING DEPTH ....................................................... 5/8-inch (16 mm)
MAXIMUM CUTTING WIDTH ....................................................... 8-inches (203 mm)
MAXIMUM MACHINE LENGTH .................................................... 43-1/4-inches (1099 mm)
MAXIMUM OPERATOR HANDLE HEIGHT.................................. 38-3/8-inches (975 mm)
OVERALL MACHINE WIDTH........................................................ 16-1/8-inches (410 mm)
CUTTING PROXIMITY TO LATERAL BORDER .......................... 3-1/4-inches (83 mm) without edger attachment
VACUUM CLEANER CONNECTION............................................ 1-1/2 or 3-inch (38 or 76 mm) outside diameter.
GENERAL
8FP/E BASIC WEIGHT ................................................................. 155 lbs (71 kg), less drum and flails.
8FP/G BASIC WEIGHT ................................................................. 160 lbs (73 kg), less drum and flails.
MAXIMUM GOVERNED ENGINE................................................. 3450 RPM
SPEED FOR 5 HP CATEGORY,
4 CYCLE, HONDA GX160 GASOLINE ENGINE
8FP/E ELECTRIC MOTOR 5.0 Hp, 3450 RPM, 21 amperes full load @ 230 VAC, 60 Hz, 23 amperes full load
@ 220 VAC, 50 Hz or The electric motor requires a clean (no other electric products on the same circuit) capacity
10 ampere capacity circuit to properly function at 230 VAC, 60 Hz.