Multiquip STXD6i_Setup - Manual (Page 11)

HTXD6i/STXD6i TROWEL • SETUP, ADJUSTMENTS AND CALIBRATIONS — REV. #1 (01/24/14) — PAGE 11
MACHINE INFORMATION
MODEL
1. Enter appropriate model:
„ HTXD6i — for 6-blade HTX
„ STXD6i — for 6-blade STX
SERIAL NUMBER
2. Machine Serial Number — as shown on serial tag.
3. Engine Serial Number — located on top of engine
(E/N) (Figure 1) or stamped on side of block (Figure 2).
Figure 1. Engine Serial Number Location 1
Figure 2. Engine Serial Number Location 2
NOTICE
The following machine information should be recorded
on Machine Information and Maintenance Log for unit
service tracking and for filing any warranty claims.
4. Pump Serial Number — located on sticker on pump
(Figure 3). The lower number is the pump serial number.
Figure 3. Pump Serial Number Location
5. Motor Serial Number — located on sticker on top of
hydraulic motors (Figure 4).The lower number is the
motor serial number.
Figure 4. Motor Serial Number Location
NOTICE
If lot number is listed instead of the serial number,
record lot number.