Multiquip WRS5200 - Manual (Page 15)

WRS 5200 RIDE-ON ROLLER SCREED — PARTS MANUAL— REV. 1# (08/09/02) — PAGE 15
Make sure that all manuals and instructions are read care-
fully before putting your new Whiteman Roller Screed into
service. Improper setup, use or maintenance of this equip-
ment could result in personnel injury or damage to the equip-
ment. Listed in Figure 2, are the location of main parts
described in the next section.
Figure 2. General Parts Location
WRS-5200 — ASSEMBLY INSTRUCTIONS
A. ROLLER SCREED PARTS ILLUSTRATION
See Figure 2 below for general parts location.
B. PUTTING INTO SERVICE
The purpose of the instructions section of this manual is to
explain the intended setup, use and maintenance procedures
recommended by Whiteman Industries.
Before packaging and shipment, this Whiteman Ride-on Roller
Screed was run and tested at the factory. If there are ANY
problems, please contact the Multiquip Service Department.