Multiquip MVC90H - Manual (Page 32)

PAGE 32 — MVC-90H PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (01/10/11)
l
MVC-90H PLATE COMPACTOR — NAME PLATE AND DECALS
NAME PLATE AND DECALS
6
5
2
4
3
7
CAUTION
READ
OWNER’S MANUAL
NPA-629 *
1
Fill up the sumps with oil before
starting
Engine : Automobile engine oil
SAE #10W~30
Vibrator : Automobile engine oil
SAE 10W~30
Warm up the engine at idle speed
for 3~5 minutes
CAUTION
NPA-306 *
DANGER
PINCH POINT
NPA-628 *
READ OWNER’S SERVICE MANUAL BEFORE OPERATING OR
SERVICING THIS MACHINE.
ALWAYS KEEP UNAUTHORIZED, INEXPERIANCED,
UNTRAINED PEOPLE AWAY FROM THIS MACHINE.
MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL
BEFORE THIS MACHINE IS STARTED. MAKE SURE ENGINE
IS TURNED OFF AND SPARK PLUG WIRE DISCONNECTED
BEFORE SERVICING THE MACHINE OR COMING IN
CONTACT WITH ANY MOVING PART. IF EQUIPMENT IS
POWERED BY AN ELECTRIC MOTOR, DISCONNECT
ELECTRICAL PLUG.
NEVER LEAVE MACHINE UNATTENDED WHEN OPERATING.
ALWAYS STOP ENGINE AND ALLOW ENGINE TO COOL
BEFORE ADDING FUEL OR OIL.
CAUTION
NPA-329 *
WATER TANK
NPA-32 *
Serial No.
Model No.