MTS 85X Damper - Manual (Page 18)

Damper System Operation 18 Safety
• Do not use the system in a test area where uncontrolled access to the test
system is allowed when the system is in operation
• Do not operate the system unless an interlock is installed to monitor supply
pressure into the HSM and initiate a system interlock if a low or no pressure
event occurs.
If you have system related responsibilities (that is, if you are an operator, service
engineer, or maintenance person), study safety information carefully before you
attempt to perform any test system procedure.
You should receive training on this system or a similar system to ensure a
thorough knowledge of your equipment and the safety issues that are associated
with its use. In addition, gain an understanding of system functions by studying
the other manuals supplied with your test system. Contact MTS for information
about the content and dates of training classes that are offered.
It is very important that you study the following safety information to ensure that
your facility procedures and the system’s operating environment do not
contribute to or result in a hazardous situation. Remember, you cannot eliminate
all the hazards associated with this system, so you must learn and remain aware
of the hazards that apply to your system at all times. Use these safety guidelines
to help learn and identify hazards so that you can establish appropriate training
and operating procedures and acquire appropriate safety equipment (such as
gloves, goggles, and hearing protection).
Each test system operates within a unique environment which includes the
following known variables:
• Facility variables (facility variables include the structure, atmosphere, and
utilities)
• Unauthorized customer modifications to the equipment
• Operator experience and specialization
• Test specimens
Because of these variables (and the possibility of others), your system can
operate under unforeseen circumstances that can result in an operating
environment with unknown hazards.
Improper operation or maintenance of your system can result in hazardous
conditions that can cause death, personal injury, or damage to the equipment or to
the specimen. Common sense and a thorough knowledge of the system’s
operating capabilities can help to determine an appropriate and safe approach to
its operation.
Hazard placards
Hazard placards contain specific safety information and are affixed directly to the
system components.
Each placard describes a system-related hazard. When possible, international
symbols (icons) are used to graphically indicate the type of hazard and the
placard label indicates its severity. In some instances, the placard might contain
text that describes the hazard, the potential result if the hazard is ignored, and
general instructions about how to avoid the hazard. Refer to the product