MTS Model 493-04 PC-Per-Station Kit - Manual (Page 8)

MTS Model 493.04 PC-Per-Station-Kit
Network Requirements
8
Crossover cable pin
assignments
If a crossover cable is used, you must wire it as shown below. For example, for
568B cable, the white/orange wires connected to Connector 1 pin 1 should go to
Connector 2 pin 3 and Connector 1 pin 2 to Connector 2 pin 6, and so forth.
.
RJ-45 C ONNECTOR C ONNECTOR 1 C ONNECTOR 2
P IN N AME TIA/EIA 568A TIA/EIA 568B P IN N AME
1 TX+ (BI_DA+) white/green white/orange 3 RX+ (BI_DB+)
2 TX- (BI_DA-) green orange 6 RX- (BI_DB-)
3 RX+
(BI_DB+) white/orange white/green 1 TX+ (BI_DA+)
4 - (BI_DC+) blue blue 7 - (BI_DD+)
5 - (BI_DC-) white/blue white/blue 8 - (BI_DD-)
6 RX- (BI_DB-) orange green 2 TX- (BI_DA-)
7 - (BI_DD+) white/brown white/brown 4 - (BI_DC+)
8 - (BI_DD-) brown brown 5 - (BI_DC-)
Top
Front
1
1
8
8