MTS Model 493-04 PC-Per-Station Kit - Manual (Page 16)

MTS Model 493.04 PC-Per-Station-Kit
Install MTS Software
16
Task 4 Install MTS Software
Software Installation Requirements
Simple TCP/IP services, TCP/IP protocol, routing, and real-time logon accounts
must be configured and fully functional. All of the PCs must have the same
Windows operating system (and service pack) installed.
How to Install System Software on the Master PC
1–Install system
software
See the Software Installation Instructions in the “READ ME” file on the 793
System Software Installation CD.
1. Before you begin, ensure that the Master PC Controller Network
connection has an IP address of 148.150.203.190.
2. Install Series 793 application software from the 793 System Software
Installation CD on the Master PC.
Note This typically requires administrator privileges.
Make sure you select the PC-Per-Station option.
2–Share the C:\MTS
793 folder on the
Master PC
From the Master PC, share the System Software folder (C:\MTS 793). and ensure
that Sharing and Security permissions are correct.
1. Right-click the C:\MTS 793 folder and select Properties.
2. Sharing settings–allow Full Control for the Everyone group.
A. Click the Sharing tab, select Share this folder, and then click
Permissions.
B. On the Share Permissions tab, select the Everyone group.
C. For Full Control, select the Allow check box.
3. Security settings–allow Full Control for the SYSTEM group.
A. Click the Security tab, and then select SYSTEM group.
B. For Full Control, select the Allow check box.
Note If the Security tab does not appear on the properties window, select
Tools > Folder Options > View. In the Advanced Settings box, clear
the Use simple file sharing check box, and then click Apply. The
Security tab should now appear.