MTS Model 493-04 PC-Per-Station Kit - Manual (Page 17)

Install MTS Software
MTS Model 493.04 PC-Per-Station-Kit 17
4. Record the computer name in which you have created the share.
How to Install System Client Software on the Dependent PC(s)
Perform the following procedures to install system client software on each
dependent PC.
Important Do not install system controller software on dependent PCs from
the system software distribution CD. Client software must be
installed over the network using files located on the Master PC.
1–Map to the Master
PC shared folder
C:\MTS 793
Map an unused drive letter on the dependent PC to the shared folder on the
Master PC.
1. Before you begin, ensure that each Dependent PC Controller Network
connection has the correct IP address.
2. Open Windows Explorer.
3. On the Tools menu, select Map Network Drive.
4. From the Folder list, select the name of the shared directory on the Master
PC, for example, “C:\MTS 793”.
Mapping Problems: Make sure that the you map to the correct Master PC
shared path. Also, ensure that Master PC Sharing and Security permissions
for everyone are set to Full Control.
5. Ensure that the Reconnect at Logon box is checked on the Map Network
Drive window.
2–Install client
software over the
network
The client installation application is located in the shared “C:\MTS 793” folder
on the Master PC. Client software is installed over the network.
1. Open the Client folder from the drive you just mapped to the Master PC.
2. Double-click setup.exe to install system client software on your dependent
PC.
3. Select the Full Install option.
Dependent PCs automatically acquire the same options as the Master PC.