Cx-3, Maintenance – MK Diamond CX-3 User Manual

Page 21

• NEVER lubricate components or attempt service on a running machine.

• Keep the machinery in proper running condition.

• Fix damage to the machine immediately and always replace broken parts, or missing decals.

CX-3

MAINTENANCE

New Maintenance
Perform the following after initial purchase and operation of the saw.

(A)

Change engine oil after

first month or first 20 operating

hours (See Engine Manual).

(B)

Check and adjust tension on

all belts following first

48 hours of operation

(See belt section).

Maintenance Following Use
The following maintenance should be performed following each use.

(A)

Shut down the Engine.

(B)

Check Air Filter

(See Engine Manual).

(C)

Lubricate the Grease Fitting.

(D)

Lubricate the pivot point of the

Pointer.

(E)

Lubricate the Cooling

Supply Valve.

(F)

Verify the tightness of all bolts

and screws.

MAINTENANCE SAFETY