MK Diamond MK-5000 Gas - Manual (Page 33)

33
(G)
Install the new belt.
(H)
Verify the belt is seated in the
grooves of both pulleys.
(I)
Tighten the Engine Adjustment
Strap Bolt to remove slack.
(J)
Check belt tension (proper tension
1/8" deflection of the belt).
Continue adjusting belt until tension
is correct then tighten the Engine
Plate Mounting Bolts.
(K)
Install the Belt Guard.
Blade shaft Belt
(A)
Remove the Belt Guard
Retaining Bolts.
(B)
Inspect the belt for cracks, fraying,
separation and wear. Go to step D
if replacement required.
(C)
Check Belt for proper tension.
(proper tension 1/8-inch deflec-
tion of the belt)
MK-5000G MaiNTeNaNCe