MK Diamond MK-2000 Gas - Manual (Page 35)

35
Bottom Edge
1/2-way up Dipstick
Bottom of Dipstick
1. Refer to Engine Manual for proper engine operation of your specific saw.
2. When installing the Oil Dipstick, ensure the threads are aligned with the threads
of the Oil Reservoir so as not to “cross-thread.”
MK-2000 GAS SAW MAINTENANCE
CHECKING OIL LEVEL
NOTES:
(A)
Level Cutting Head.
(B)
Remove Dipstick.
(C)
Check Oil Level. If level is normal
go to Step F.
(D)
Fill Oil Reservoir.
(E)
Add Oil until level reaches the
bottom edge of fill hole.
(F)
Install the Dipstick.
(G)
Clean Up.