MK Diamond MK-2000 Gas - Manual (Page 29)

29
MK-2000 GAS SAW MAINTENANCE
Perform the following after initial purchase and operation of the MK-2000 Gas Saw.
INITIAL MAINTENANCE
(A)
Change engine oil after first
month or first 20 operating hours.
Refer to Engine Manual.
(B)
Check and adjust V-belt tension
following first 48 hours of opera-
tion. See Micro V-belt Inspection.
To extend the life of the MK-2000 Gas Saw, the following procedure should be performed after each
use. Lubricate all points listed below with light oil such as, 3 in 1, WD-40, etc.
MAINTENANCE FOLLOWING USE
(A)
Place Engine Switch in the
OFF position.
(B)
Lubricate the Movable Cutting
table Roller Wheels.
(C)
Lubricate Torsion Spring.
(D)
Lubricate Blade Guard Pivot.
(E)
Lubricate engine throttle link-
age Points and Adjustment Bar.
Refer to Engine Manual.