MK Diamond MK-2000 Gas - Manual (Page 33)

33
MK-2000 GAS SAW MAINTENANCE
(A)
Remove the movable
Cutting Table.
The protective wooden strip is to protect the Movable Cutting Table from damage during operation.
Over time, the wooden strip will become grooved from use. A grooved wooden strip will not support
masonry during cutting causing the blade to “break through” the piece instead of performing a smooth
cut (MK Diamond Part No. – 156427).
PROTECTIVE WOODEN STRIP REPLACEMENT
(B)
Place movable Cutting Table on
work bench with Roller Wheels up.
(C)
Remove the two Protective
Wooden Strip Retaining Screws.
(D)
Replace worn Protective
Wooden Strip.
(E)
tighten screw to secure new
Wooden Strip.
(F)
Install the movable Cutting Table.