beautypg.com

Mk-2000 gas saw maintenance – MK Diamond MK-2000 Gas User Manual

Page 32

background image

32

MK-2000 GAS SAW

MAINTENANCE

(H)

Move the Throttle Lever to lower

blade speed. Refer to

Engine Manual. turn OFF saw.

DIAMOND BLADE CHANGE-OUT

(A)

Raise Cutting Head and remove

Retaining Screw and Outer Flange.

(B)

Remove old Diamond Blade.

(C)

Install new Diamond Blade onto

Blade Shaft.

(D)

Verify Blade is seated on Blade

Shaft in correct rotation direction.

(E)

Install Retaining Screw and

Outer Flange then tighten.

When installing the diamond blade retaining-bolt, ensure the threads of the bolt

are aligned with the threads of the drive shaft so as not to “cross-thread” the bolt.

NOTE:

See also other documents in the category MK Diamond Power saws: