Metal Sales TDR-6 - Manual (Page 3)

PI/D-3
I
ndustrIal
r
Ib
/ d
eep
r
Ib
s
erIes
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
T13-a P
anel
o
verview
T13-A ROOF PANEL PROFILE
T13-A WALL PANEL PROFILE
3"
6" Pitch
24" Coverage
C
1 5 /
8
"
3 1 /
8
" 2 7 /
8
"
2 3 /
8
"
24" Coverage
C
1 5 /
8
"
3"
6" Pitch
3 1 /
8
" 2 7 /
8
"
2 3 /
8
"
SLOPE
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISHES
The minimum recommended slope for any T13A roof panel is 1:12. Metal Sales recommends that in all roof
applications sealant be used on sidelaps.
T13A panel is designed to be utilized over open structural framing, but can easily be used with a solid substrate.
The recommended substrate is 5 /
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure.
Each panel has a coverage of 24"
Lengths under 5'-0" are available with some cutting restrictions. Maximum recommended panel length is 45'-0".
Longer panels require additional consideration in packaging, shipping, and erection. Please consult your Metal
Sales branch for recommendations (see PGI-2 and PGI-3 for locations).
Commercial, Industrial, and Architectural panels.
Direct Fastened (exposed).
The fastener selection guide should be consulted for choosing proper fasteners for specific applications.
Quantity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
Steel grade 50, per ASTM A-792, Optional material: stainless steel, copper, and aluminum.
Panels are available in 24 through 16 gauge. Minimum quantities may apply.
Custom capabilities include:
-Crimp curving on numerous panel profiles.
-Curving may be convex, concave, or "S" curves.
-Perforated panels for wind screens and liner panels.
 * Acrylic Coated Galvalume ® (ACG) / ASTM A-792 - AZ55  Multi-Pass Kynar
 Prepainted Galvalume / ASTM A-792 - AZ50  Marbilique
 MS Colorfast45 ®  Plastisol
 ** Fluorocarbon (PVDF)  Polyester
* Differential appearance of Acrylic Coated Galvalume roofing materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specifications.